Stamped-bent parts
Assemblies and laser-welded parts with maximum efficiency
Assemblies and laser-welded parts
Our assemblies and laser-welded parts are used in many industries. Laser welding can be used to bond different materials to each other accurately and without distortion, providing a trouble-free alternative to costly turned and milled parts. Our sophisticated manufacturing processes allow the production of assemblies in high volumes at low cost.
Dimensions
- Strip thickness: 0.50 – 3.00 mm
Materials
- Hot/cold rolled grades (also with coating)
- carbon steels (if weldable)
- Stainless steels
- Non-ferrous metals and alloys
- Special alloys
Design/features
- Welding, thread molding and cutting, screwing, installation, riveting, caulking or soldering can be integrated into the process
- Laser welding for the highest quality standards
- Use of the latest technology for customized final inspection
- Cost reductions compared to conventional methods possible
- Bonding of different materials
Downstream processes
- Deburring
- Surface protection
- Heat treatment
- Cleaning
- Testing/sorting
Take advantage of our expertise in stamping and bending technology and laser welding to manufacture your assemblies efficiently or to develop cost-optimized laser-welded solutions.




Eberle manufactures strikers for side door locks and hood latches in passenger cars and vans. Our technologies enable complete production of the individual components made of wire, flat material and plastics. The subsequent assembly of the components is completed by a reliable, automatic process.
Dimensions- Strip thickness: 0.50 – 5.00 mm
- Wire diameter: 1.0 – 8.00 mm
Materials
- Hot/cold-rolled grades (also with coating)
- Carbon steels (also pre-hardened)
- Stainless steels
- Special alloys
Design/features
- Wire connected to the base plate by cold joining methods or laser welding
- Additional requirements such as thread molding can be integrated into the process
- Use of pre-hardened wires
- Surface protection of individual components or assemblies possible
- Application of coating protection
Downstream processes
- Deburring/polishing
- Surface protection
- Heat treatment
- Cleaning
- Testing/sorting
- Application of coating protection
Take advantage of our global presence and experience as a reliable development and manufacturing partner in the area of stamping and bending technology and laser welding to develop high-quality made to measure hasps.

Bourdon tubes for piezo systems are used for example in diesel and gasoline injectors or in medical engineering. Eberle also uses laser welding in this manufacturing process to bond different materials.
Dimensions- Strip thickness: 0.20 – 1.00 mm
Materials
- Stainless steels
- Special alloys
Design/features
- Precision stamping of the spring element
- Laser welding for the highest quality standards
- Mounting of end plates
- Use of the latest technology for customized final inspection
Downstream processes
- Deburring/polishing
- Brushing/shot peening
- Heat treatment
- Cleaning
- Oiling
- Testing/sorting
- Appropriate packaging
Take advantage of our in-depth expertise in the area of stamping and bending technology and laser welding to develop the ideal Bourdon tube for your application.

Contact

Product group: Assemblies and laser-welded parts
Telefon: +49 (0) 8232 – 5002 – 322
Fax: +49 (0) 8232 – 5002 – 166
Mail: stanzbiegeteile@eberle-federn.de